- Peco PLS-120 SmartSwitch Board
The 'SmartSwitch' Board can operate up to four servo motors simultaneously, each of which can be individually programmed to set the exact start and stop positions required, together with a choice of nine operating speeds. Set-up is easy for the Peco PLS-120: all connections to the SmartSwitch board simply plug together or attache to screw terminal blocks. Programming is easily done using the detachable servo programming board, which is part of the PLS-100 Smartswitch Starter Set, and full, plain-English instructions are included with each set.
Customers Also Bought...
Peco PL-18 Studs and Tag Washers are a simple yet effective method of turnout motor operation. Studs in a track plan panel are wired to the motors whi...£3.70£4.36
Peco PL-22 On-Off Switch is used for controlling isolated sections of track or to operate accessories. Single Pole On-Off. Part of the Peco Lectrics C...£6.08£7.15
The Peco PL-13 Accessory Switch is a simple, inexpensive switch easily fitted underneath the Turnout Motor (PL-10) to provide electrical switching for...£3.49£4.10
The Peco PL-70 Loco Servicing Cradle allows you to look after your model collection making it an extremely useful item. Loco's and rolling stock can b...£6.76£7.96
The Peco PL-9 Mounting Plates is a base unit for use with the motor with the extended pin ref. PL-10E. Full instructions and screws included. Qty per ...£2.98£3.50
Peco PL-64 Power-Lube solves pick-up and other electrical problems. Can be used with most plastic, keeps motor and bearings running free, reduces wear...£6.89£8.10