- Peco PL-28 Switch Mounting Plate
The Peco PL-28 Switch Mounting Plate makes a neat job of mounting your lever switches into a mimic diagram or home made panel. Pack qty = 6. Part of the Peco Lectrics Control System
Customers Also Bought...
The Peco PL-9 Mounting Plates is a base unit for use with the motor with the extended pin ref. PL-10E. Full instructions and screws included. Qty per ...£2.98£3.50
The Peco PL-13 Accessory Switch is a simple, inexpensive switch easily fitted underneath the Turnout Motor (PL-10) to provide electrical switching for...£3.49£4.10
The Peco PL-12 Adaptor Base should be used in association with most non-PECO turnouts, where the over-centre spring feature is not available. It can b...£2.85£3.35
Peco PL-64 Power-Lube solves pick-up and other electrical problems. Can be used with most plastic, keeps motor and bearings running free, reduces wear...£6.89£8.10
Peco PL-18 Studs and Tag Washers are a simple yet effective method of turnout motor operation. Studs in a track plan panel are wired to the motors whi...£3.70£4.36