- Peco PL-10E Turnout Motor (Extended Pin)
Peco PL-10E Turnout Motor (Extended Pin) designed for use with PL-9 mounting plate. Use this if you do not wish to cut a large hole in your baseboard. Drill a hole, 9.5mm (3/8in) through the baseboard beneath the centre of the tie bar. Part of the Peco Lectrics Control System.
Customers Also Bought...
Introducing Cobalt-iP Digital – Cobalt-iP Digital is a new Cobalt DCC-on board product that adds on-board DCC control to the very best features of Cob...£21.56£26.95
The Peco PL-13 Accessory Switch is a simple, inexpensive switch easily fitted underneath the Turnout Motor (PL-10) to provide electrical switching for...£3.49£4.10
Seep Point Motors have the advantage of being easy to fix under the baseboard. requiring only a small slot to operate the point. The PM-4 is a self-la...£5.80£7.25
Peco PL-23 On-On Changeover switch is used to control colour light signalling or use two ganged together as a polarity reversing switch. Single Pole C...£6.08£7.15