Peco G - 45 Track for Garden Railways

Save £££'s off RRP on Peco G-45 Flat Bottom track. True to scale looking track suitable for use with most makes of 16mm and G scale narrow gauge trains. Peco G-45 track uses Code 250 Flat Bottom Nickel Silver rails, and slightly irregularly spaced palstic sleepers with a 'weathered' finish which capture the narrow gauge character.

This is strong, yet readily flexible track built to take the heavy weight of locomotives in this size. It can be used indoors or out using live steam or electric locos.

SL-900 Peco G - 45 Track: Flexi Track 6x914mm

In stock.

Box of 6 pieces of 45mm gauge Peco flexi track with Code 250 Nickel Silver rails and plastic wood grain effect sleepers, 914 mm long.

This flexi track doesn not come with rail joiners in the box, you need to purchase these and will find them further down the page.

Any quantity only £7 UK P&P.

ST-905 Peco G - 45 Track: Setrack 6 x Curves

In stock. Box of 6 pieces of 45mm gauge Peco G-45 Setrack curves. These small radius units are easier to use wherever limited space dictates tight curves, eliminating the need to curve flexible track to this radius. These rigid units of track use Code 250 Nickel Silver rails, plastic wood grain effect sleepers, and come complete with rail joiners.

600mm (23 5/8") radius, 30 degree angle, 12 pieces make a circle.

Caution: Sharp bends? These curves are 2' radius and will prevent you running certain larger locos and items of rolling stock. We recommend, if space permits, to use flexi track to create curves of 4' radius (or larger) as standard.

ST-902 Peco G - 45 Track: Setrack 6 x Straights

In stock. Box of 6 pieces of 45mm gauge Peco G-45 Setrack straights. These rigid units of track use code 250 Nickel Silver rails, plastic wood grain effect sleepers, and come complete with rail joiners.

Length: 300mm (11+13/16")

SL-995 Peco G-45 Track: Right Hand Point

In stock. 1219mm (4ft) medium radius, 45mm gauge, right hand point with Code 250 Nickle Silver rail and plastic wood grain effect sleepers.

These superb G-45 turnouts require no extra levers for hand operation, but if a lever is required at the side of the track you will find a suitable one below.

Turnout blades are precisely machined from solid nickel silver rail whilst the insulating frog is moulded in a special hard wearing plastic.

Unlike other Peco insulfrog turnouts they are not electrically self-switching - all rails remain 'live' however the blades are set.

Nominal radius: 1219mm (48in)
Angle: 12 degrees
Length: 600mm (23+5/8 in)

SL-996 Peco G - 45 Track: Left Hand Point

In stock.

1219mm (4ft) medium radius, 45mm gauge, left hand point with Code 250 Nickle Silver rail and plastic wood grain effect sleepers.

These superb G-45 turnouts require no extra levers for hand operation, but if a lever is required at the side of the track you will find a suitable one below.

Turnout blades are precisely machined from solid nickel silver rail whilst the insulating frog is moulded in a special hard wearing plastic.

Unlike other Peco insulfrog turnouts they are not electrically self-switching - all rails remain 'live' however the blades are set.

Nominal radius: 1219mm (48in)
Angle: 12 degrees
Length: 600mm (23+5/8 in)

SL-910 Peco G - 45 Track: Rail Joiners

In stock.

Pack of 18 Nickel Silver rail joiners for Peco code 250 rail.

Letterbox delivery. Unless included in a large order these items will be posted by 1st Class Packet, prices from £2.50 will be calculated at the checkout based on weight of order.

SL-911 Peco G - 45 Track: Insulated Rail Joiners

In stock. Pack of 12 insulated rail joiners for Peco code 250 rail.

Letterbox delivery. Unless included in a large order these items will be posted by 1st Class Packet, prices from £2.50 will be calculated at the checkout based on weight of order.

SL-912 Peco G - 45 Track: Rail Joiners for Code 250 to Larger Section

In stock. Pack of 6 plastic rail joiners to join Peco code 250 rail to larger rail sections. Can be used as an insulated joint, or with conductive strips included.

Letterbox delivery. Unless included in a large order these items will be posted by 1st Class Packet, prices from £2.50 will be calculated at the checkout based on weight of order.

SL-928 Peco G - 45 Track: Large Scale Point Lever

In stock. Useful accessory for controlling SM32 and G45 turnouts. Supplied in kit form, it comes with an optional extension bar.

Simple assembly, full instructions included.

Letterbox delivery. Unless included in a large order these items will be posted by 1st Class Packet, prices from £2.50 will be calculated at the checkout based on weight of order.

SL-940 Peco G - 45 Track: Buffer Stop Kit

In stock. An all important item to finish a siding. This sleeper built type is modelled on typical narrow gauge practice. It fits onto both G-45 flexitrack and setrack. Simple assembly.

Letterbox delivery. Unless included in a large order these items will be posted by 1st Class Packet, prices from £2.50 will be calculated at the checkout based on weight of order.

PL-8 Peco G - 45 Track: G Scale motor mounting plate

Mounting plate to use LGB point motor with Peco G-Scale turnouts. Can be used either above or below baseboard.

Letterbox delivery. Unless included in a large order these items will be posted by 1st Class Packet, prices from £2.50 will be calculated at the checkout based on weight of order.

Saturday Delivery Upgrade

In stock items ordered by lunchtime have a signed for UK special delivery, next working day (Mon-Fri) by 1pm.

If ordered by Friday lunchtime your parcel can be delivered on Saturday by 1pm for a small charge. You can also use this option if you prefer orders placed earlier in the week to be held back for Saturday delivery.

Any Questions?

For e-mail please use the "Contact Us" facility above, or feel free to ring John Boyes on 01624 843084 to discuss anything you are unsure about.

The phone is normally manned Mon-Fri 0900-1630, with early closing on some days when the sun is shining!