Peco SM32 Track

SL-600 Peco SM32 Track: Flexi Track 12x914mm

Save £27.00 off list price - in stock.

Box of 12 pieces of 32mm gauge Peco flexi track with Code 200 Nickel Silver rails and plastic wood grain effect sleepers, 914 mm long.

This flexi track doesn't come with rail joiners in the box, you need to purchase these and will find them further down the page.

Any quantity only £4.95 UK P&P.

ST-605 Peco SM32 Track: Setrack 6 x 30" Radius Curves

Save £10.30 off list price - in stock.

Box of 6 pieces of 32mm gauge Peco Setrack curves. These small radius units are easier to use wherever limited space dictates tight curves. Code 200 Nickel Silver rails, and plastic wood grain effect sleepers.

762mm (30") radius, 30 degree angle, 12 pieces make a circle.

Caution: Sharp bends? These curves are 2'6" radius and will prevent you running certain larger locos and items of rolling stock. We recommend, if space permits, to use flexi track to create curves of 4' radius (or larger) as standard.

SL-E691 Peco SM32 Track: 38" Radius Right Hand Point

Save £10.50 off list price.

In stock.

38" (965mm) radius right hand point.

The new Streamline turnouts, SL-E691 and SL-E692, are in reality both Setrack turnouts in all but name, with a curved exit (as opposed to the combined curved/straight exit of the larger SL-E695/6 turnout). Used with the new ST-607 Setrack 2nd radius curve unit correct double track spacing is maintained, allowing for passing loops to be installed if required.

The turnout has a length of 14.5 inches (369mm).

SL-E695 Peco SM32 Track: 60" Radius Right Hand Point

Save £9.95 off list price - in stock.

Medium radius 32mm gauge right hand point with Code 200 Nickle Silver rail and plastic wood grain effect sleepers.

Fitted with over-center spring, and ready to use by hand (no extra levers or switches to buy). For remote control the Peco Lectrics Turnout Motor PL-10 simply clips on underneath.

Nominal radius: 1524mm (60in)
Angle: 8 degrees
Length: 510mm (20+1/8 in)

SL-E697 Peco SM32 Track: Y Point

Save £9.95 off list price - in stock.

Medium radius 32mm gauge Y point with Code 200 Nickle Silver rail and plastic wood grain effect sleepers.

Fitted with over-center spring, and ready to use by hand (no extra levers or switches to buy). For remote control the Peco Lectrics Turnout Motor PL-10 simply clips on underneath.

Nominal radius: 2413mm (95in)
Angle: 8 degrees
Length: 487mm (19+5/32 in)

SL-928 Peco Track: Large Scale Point Lever

In stock.

Useful accessory for controlling SM32 and G45 turnouts. Supplied in kit form, it comes with an optional extension bar.

Simple assembly, full instructions included.

SL-801 Peco G1 & SM32 Turnout Parts: Sleepering

In stock.

Pack of 15 lengths of sleepering approx 178mm long for use in DIY turnout construction.

SL-803 Peco G1 & SM32 Turnout Parts: Slide Rail Fixings (Chairs)

In stock.

Pack of approx 50 plastic slide rail fixings (chairs). These are the slide chairs to go under the switch blades and stock rails.

SL-808 Peco G1 & SM32 Turnout Parts: Turnout blades

In stock.

Pack of 2 machined switch blades made of Peco code 200 rail.